MPM UP - 2000 Screen Printer

Features:
Patented Automatic Vision Alignment
Increased Board Throughput via Optimized Motion Control
Rapid Product Changeover
Enhanced SPC Reporting for Data Collection and Display
Increased PWB Profile Storage (over 400 files)
Board Files can be Shared with MPM’s AP S-Series Printers
Board Profile Names, up to 32 Characters

Options:
Fully Programmable Paste Dispensing System
Integrated Post-Print Deposition Analysis

Machine Dimensions
Printer:
63.24in (1606.3mm) Wide
46.0in (1168.4 mm) Deep
64.44in (1636.78mm) High
Conveyor
51.0in (1295.4)

Approximate Shipping Weight:
1,500 lb (677 kg)

Pneumatic Requirements:
80 psi @ 4 cfm (1176 bar at 113.28 L/min) –
125 psi @ 4 cfm (1837.5 bar at 113.28 L/min)

Performance:
Alignment Repeatability
+/- 0.0005 in. @ 6 Sigma
Verified with glass plate capability test
Alignment Repeatability +/- 0.001in @ 6 Sigma
Cycle Time: < 11 sec. (excludes print stroke)

Electrical Requirements:
115 VAC at 60 Hz 30 Amps
220 VAC at 50 Hz 20 Amps
240 VAC at 50 Hz 20 Amps

Print Parameters:
Print Area: 18in x 16in (457 x 406 mm) (X,Y)
Snap Off: -0.050in to +0.1in (-1.3 to 2.5mm)
Squeegee Pressure:
Balanced Control- 1lb. to 60lb. mm/sec) (0.4 kg to 27 kg)
Self-Level Head- 1lb. to 50lb. (0.4 kg to 22.5 kg)
Squeegee Speed:
0.25in/sec to 12in/sec
(6.35mm/sec x 305mm/sec)

Vision Parameters:
Fiducial Method: 2 to 5 models standard fiducials or pads
Fiducial Types: All conventional fiducials accepted
Camera System: MPM unique high speed linear drive system with patented optics

Board Handling

Board Size:
Max – 20in. x 16 in. (508mm x 406 mm)
Min 2 in. x 2 in. (50.0 mm x 50.0mm)
(16 in. or greater board lengths require dedicated work holders)

Thickness:
0.015in to 0.005in (0.381 to 12.7mm)

Underside Component Clearance:
0.50in (1.27cm)
Optional – 1.0in (2.54cm)

Machine Interface Transport Speed:
Programmable up to 35in/sec (889mm/sec)

Transport Height from Floor:
Adjustable 34.5in to 41 in (876mm to 1041mm)

Method of Support in Print/Vision Cycle:
Magnetic Pins, Optional Dedicated Work Holders

Method of Board Hold-Down:
Underside Vacuum, Y-axis Snuggers and Z-axis clamps

Conveyor Configuration:
Factory-Configurable Front or Rear Rail Justified
Method of Board Hold-Down: Underside
Transport Track Feed Direction: User Definable

For More Information Contact Sales Department:
Phone: 603-880-7355
e-mail: sales@v-ne.com