Universal GSM-II SMP Machine

High Volume Placement Machine

Features:
High Volume, Fine Pitch Placement Design
Precision Linear Scales
Brushless DC Motors
On-The-Fly Vision System
Two Beams – One Placement Head Mounted In Each Beam
Graphical Interface with an On-Line Component Database
CAD Translation
Machine Performance Simulator

Equipment Specifications

Floor Space Requirements:
A minimum of 3 feet (1m) around the machine is recommended to allow sufficient room for operation

Machine Dimensions:
66 in. (1676mm) wide x 86in. (2184 mm) deep x 100in. (2540 mm) high

Approximate Shipping Weight:
6,500 lb (2951 kg)

Pneumatic Requirements:
6 cfm @ 90 psi (113.3 l/min @ 6.22 bar)

Electrical Requirements:
230 VAC Nominal
50/60Hz, 3 Phase
30 Amps

Placement Specifications
Final Placement Performance:
50 Defects per Million (dpm) Intrinsic Availability: 98%
X,Y Accuracy: +/- 0.00150 in. (0.0381 mm)
X,Y Repeatability: < 0.000667 in. (0.0169mm)
Rotational Accuracy: +/- 0.06 Degree
Rotational Repeatability: <0.0466 Degree

Placement Rate:
Test Board Rated at 10,000 Components per Hour

Positioning System:
X Axis Travel: 28.640 in. (727.46 mm)
Y Axis Front Beam Travel: 28.375 in. (720.73 mm)
Y Axis Rear Beam Travel: 30.000 in. (762.00 mm)

Placement Head Combinations:
General Application Placement Heads
Non-Contact Chip Heads, NCC8

Board Parameters:
Maximum: 20 in. x 18 in. (508 mm x 457 mm)
Minimum: 2 in. x 2 in. (51 mm x 51 mm)
Board Thickness:
0.020 in. (0.508 mm) to 0.200 in. (5.08mm)
Top side Clearance: 0.500 in. (12.7 mm)
Bottom side Clearance: Dependent on Component
Orientation 0.500 in. (12.7 mm)/ 1.0 in. (25.4 mm)
Registration: Top Edge Register, Front Edge Register, Tooling Pin, Vision (PEC)
Transfer Direction: Left to Right

For More Information Contact Sales Department:
Phone: 603-880-7355
e-mail: sales@v-ne.com